Ford Performance Releases 'Werewolf' Iron Coyote Block
There’s no denying that the 5.0-liter Coyote engine is one of the most popular powerplants to roll off of a Blue Oval assembly line. However, it does have a weakness, and that is the aluminum block construction., Even when sleeved, it still has limits at extreme power levels. Until now …
Ford Performance has released what they are calling the “Werewolf” engine block. A cast-iron variant of the Coyote block, it is designed to take an extreme amount of abuse. “This block has the capability to go to 5.6-liters,” says Ford Performance’s Ron Ewert. “It can be bored to 95mm and stroked to 99mm. We made some changes in the crankcase to raise the ceiling. This allows for more rod-path clearance to get that much stroke.”
In addition to the ability to go with a bigger bore and stroke, there are also some structural improvements that have been made. “We added a bridge on the bottom water opening for added strength in the deck-face, and it’s got long 12mm head-bolt holes. It will have billet steel six-bolt main caps and all the oil passages are drilled not cast,” Ewert explains.
It will retain the factory dimensions in key areas — like main-bearing bore and deck height — along with the factory 100mm Coyote bore-spacing. “It’s Class-50 cast iron, so it’s a stronger iron than you would see in a typical production cast-iron block. Quite frankly, we don’t know what the power limit is”, Ewert says.